regenerative cycle
英 [rɪˈdʒenərətɪv ˈsaɪkl]
美 [rɪˈdʒenərətɪv ˈsaɪkl]
网络 回热循环; 回热; 再生循环; 再生周期
双语例句
- Boiler feed-water temperature is an important parameter of design and optimization of boiler and regenerative cycle in therme power plants.
锅炉给水温度是电厂锅炉设计和回热系统设计、优化的重要参数。 - Experimental analysis on the performance of a regenerative brayton refrigeration cycle
回冷式逆布雷顿空气制冷机的试验分析 - Constant pressure regenerative cycle
定压[等压]回热循环 - In general, the motor power rating, speed, torque, and details of the regenerative duty cycle need to be known.
一般而言，我们应该清楚电机的额定功率，速度，力矩和具体的制动周期。 - Intercooled regenerative cycle gas turbine superthermal diesel
中间冷却式回热循环燃气轮机带中间冷却器的增压柴油机 - Regenerative air cycle Numerical simulation of effusion holes on the longitudinal ripple heat shield
回热式空气制冷循环发散孔纵向波纹隔热屏气膜冷却特性 - THE DESIGN AND PERFORMANCE ANALYSIS OF SINGLE-STAGE COMPRESSION REGENERATIVE REFRIGERATION CYCLE USING MIXED REFRIGERANTS Study on Characteristics of the Ejector in Quasi Two-Stage Compression Heat Pump Coupled with Ejector
混合工质单级压缩回热制冷系统的设计与性能分析准二级压缩&喷射复合热泵系统用喷射器的性能研究 - The Design and Thermal Property Analysis for Regenerative Tubular-furnace of Cycle Gas
蓄热式循环瓦斯管式加热炉研发及热工特性分析 - A new type of energy saving gas stove with heat recovery is proposed, which adopts heat regenerative cycle to improve gas stoves thermal efficiency.
提出一种带回热的新型节能燃气灶，即采用回热循环来提高燃气灶的热效率。 - Thermo-siphon circulation type cooling system Performance characteristics of an irreversible regenerative Brayton refrigeration cycle working with an ideal Bose gas
热流循环液冷却系统不可逆回热式玻色布雷顿制冷循环性能分析 - Thermo-siphon circulation type cooling system regenerative air cycle
热流循环液冷却系统回热式空气制冷循环 - Moreover, a numerical simulation was carried out for the regenerative room-temperature magnetic refrigeration cycle based on the new parameters.
并依此参数的新表达式对回热式室温磁制冷循环进行数值计算。 - An interative approximation to the optimum distribution of enthalpy rises in a regenerative cycle by the method of equivalent enthalpy drop
用等效热降法逐次逼近回热循环最佳焓升分配&兼论国产60万千瓦机组的回热分配燃气轮机中间回热循环性能分析 - Alternative regenerative cycle performance analysis
燃气轮机中间回热循环性能分析 - Forced Regenerative Chatter and Limit Cycle of Machine Tool Cutting System
机床切削系统的强迫再生颤振与极限环 - The filtration efficiency and the regenerative cycle time of the three metal filters tended to stable after twenty pulse cleanings.
三种类型的金属过滤介质经过约二十次反吹再生后，其过滤效率、反吹再生周期趋于稳定。 - In order to solve this problem, a nonlinear optimization method was applied to optimize the heat regenerative system, and the cycle efficiency can be further improved.
为了解决这个问题，采用非线性优化方法通过变动汽轮机的抽气参数得到回热系统的给水焓升最佳分配方案，从而进一步提高了机组的热力性能。 - According to the working principle and process of regenerative injection of the regenerative liquid propellant auxiliary chamber gun, this thesis analysis the process of regenerative injection cycle and puts forward the structure of the auxiliary chamber.
本文从再生式液体发射药辅助药室火炮的再生喷射原理和工作过程出发，分析了辅助药室火炮再生喷射循环过程，提出了再生式液体发射药辅助药室的结构。 - Finally, we also analyse the influences of environment temperature, turbine inlet temperature, the efficiency of assemblies, drag in flow and regenerator effectiveness on the specific output and thermal efficiency of simple cycle and regenerative cycle.
最后还分析了环境温度、涡轮进口温度、各部件效率、流动阻力、回热度等因素对简单循环和回热循环的比功和循环效率的影响。 - In this article, detailed thermodynamic analyses of basic adsorption refrigeration cycle and regenerative adsorption refrigeration cycle is presented, an advanced adsorption cycle with internal vapour and heat recovery is developed.
本文建立了吸附式制冷基本循环和连续回热循环的热力模型，研究和发展了有蒸汽质量迁移的新型回热循环。 - This paper presents an analysis of the reheating regenerative steam turbine cycle by the small deviation method and thereby derives the expressions for the effects of internal stage and turbine efficiency on output power and heat rate.
本文用小偏差方法对再热&回热汽轮机系统进行了分析，得到级内效率、缸内效率等参数对输出功率、热耗率等参数的影响系数表达式。 - An irreversible model for Stirling gas regenerative engine cycle is presented in this paper, in which heat resistance and regenerative losses are considered.
本文应用了一种回热式不可逆气体斯特林热力学循环热机模型，它不仅考虑了热传导引起的不可逆性，也考虑了回热损失引起的不可逆性。 - Adiabatic expansion-Exhaust regenerative refrigerating cycle
绝热膨胀-放气回热式制冷循环&一种新的闭式气体循环 - Thermodynamic analysis for ideal heat regenerative cycle in porous medium engine
多孔介质（PM）发动机理想循环热力学分析 - By using chemical combustion theory and variable specific heat capacity approach, a method of calculation and analysis of thermal performance parameters of micro-turbine device on a regenerative cycle is presented.
根据化学燃烧理论和变比热容计算方法，提出了微型燃气轮机回热循环装置性能参数的计算和分析的方法； - Analyze the performance of regenerative cycle using R22& R410a refrigerant under refrigeration and heat-pump condition. The feasibility of using regenerator is analyzed by experiments.
分析了制冷和制热工况下R22及R410a工质回热循环的性能，并利用多种不同结构形式的回热器在实验样机上进行了实验验证。 - Thermodynamics Design of Regenerative Cycle System in 200 MW Modular HTGR
200MW模块式高温气冷堆回热循环系统热力学设计研究 - Thermal efficiency of waste heat in steam regenerative power cycle
余热在蒸汽回热动力循环中的热效率 - Research on Performance of Regenerative Room-Temperature Magnetic Refrigeration Cycle Through Magnetocaloric Parameter Deduced by Langevin Theory
用Langevin理论研究回热式室温磁制冷循环性能 - The influence of heat transfer irreversibility, and regenerative loss to cycle performance including power and efficiency is studied through finite time thermodynamic.
利用热力学优化方法，探索传热不可逆性、回热损失因素对混合加热循环的输出功率和效率等循环性能的影响，通过数值算例详细讨论优化结果随主要不可逆因素的变化规律。